LPU-1 DIR Induction receiver
The LPU-1 takes the signals transmitted by an induction loop system directly to the ears of people who do not wear hearing aids.
The ear buds of the featherweight, ergonomically designed under-the-chin receiver can swivel to stay comfortably fixed in the user’s ears even when he/she moves his or her head. The soft flexible material of the the ear buds also nestles gently into the auditory canal to effectively subdue ambient noise.
Specification
| Sound frequency transmission range | 70-5400 Hz |
| Distortion factor | < 1% |
| Signal-to-noise ratio | 60 dB |
| Maximum volume | 120 dB |
| Weight | 55 g |
| LPU-1 | A-4276-0 |
Charging stations for LPU-1
| 5-bay recharger for LPU-1 DIR | A-4976-0 |
| Single recharger for LPU-1 DIR | A-4977-0 |
»LPU-2 PR«: Ring loop receiver with headphone connection
The handy »LPU-2« ring loop receiver has a belt clip, which can also be replaced with a carrying cord (included). The 3.5 mm jack output enables the connection of various headphones and other audio components. This new development combines optimum reception of inductive audio signals with long-lasting battery life.
Scope of delivery
- »LPU-2 PR«
- 2x AAA NiMH rechargeable batteries
- Lanyard with clip
- Belt clip
- Lightweight headphones
- Instruction manual
- Warranty card
Specifications
| Weight: | approx. 111 g with battery |
| Colour and material: | ABS plastic, black |
| Battery, operating time: | 2x AAA NiMH rechargeable batteries, approx. 6 hours |
| Audio frequency transmission range: | 85Hz - 6kHz ± 0.5dB |
| Low Cut: | 400Hz - 6kHz - 3dB |
| Distortion: | <0.5% THD @ 1KHz |
| signal-to-noise ratio: | typ. 60 dB |
| Output power: | >100mW @ 16Ω |
| Controller/switch: | Rotary control for on/off+volume, low-cut filter |
| LPU-2 | A-4276-0 |
Active display for inductive loop fields
Specifications
Weight: Indication: Signal strength detection: Scope of delivery:
| Dimensions H x W x D: | 18 cm x 15 cm x 4.5 cm |
| Weight: | 360 g |
| Indication: | LED green or red, depending on the signal strength of the loop. |
| Signal strength detection: | integrated loop signal strength sensor + external loop sensor |
| Scope of delivery: | T-sign; power supply; wall mounting set with plasterboard anchor, screws and cable ties; external loop sensor (plugged into the loop label); small screwdriver; instruction manual |
| T-Sign, luminescent | A-4278-0 |
Wall-mounted casing for Class-D loop drivers:
The wall mounting case for Class D loop drivers is specifically designed for use in areas where loop amplifiers require special mechanical protection. The robust steel housing does not allow access to the amplifier without special tools.
Specifications
| Suited for Class-D loop drivers | Pro Loop D5 Pro Loop D15 Pro Loop D5LOS Pro Loop D15-LOS |
| Dimensions (closed) W x H x D (cm): | 261 x 353 x 55 |
| Material: | 1 mm steel sheet, coated |
| Colour: | black, white |
| Housing colour black | A-4294-0 |
| Housing colour white | A-4294-W |
Small »Cross-the-counter« induction loop
| cross-the-counter Loop approx. 40 x 25 cm, with 4.5 m supply cable, incl. fixing material | A-4917-0 |
Compact small inductive listening system
| »Sign Loop« – information sign 20 x 20 cm with integrated inductive loop, incl. white cover caps and bracket pins | A-4214-0 |
Loop cables – insulated
| CFC 075-50 Copper flat ribbon cable, 0,75 mm², roll 50 m | A-4911-0 |
| CFC 075 Copper flat ribbon cable, 0,75 mm², roll 100 m | A-4912-0 |
| CFC 54-50 Copper flat ribbon cable, 5,4 mm², roll 50 m | A-4937-0 |
| CFC 54 Copper flat ribbon cable, 5,4 mm², roll 100 m | A-4948-0 |
| CFC 18-50 Copper flat ribbon cable, 1,8 mm², roll 50 m | A-4938-0 |
| CFC 18 Copper flat ribbon cable, 1,8 mm², roll 100 m | A-4949-0 |
Information sign for marking areas with inductive listening systems
| Information sign 30 x 30cm, incl. fastening material | A-4956-0 |