xepton TX-1, transmitter
A small but powerful transmitter with connectors for headsets and microphones provides for typical one-directional applications. Once switched on, the device is instantly ready to use and the LC-Display informs about the current state. Should adjustments be necessary, only three buttons are needed to browse and set the menu-guided options. The maximum signal range is – depending on the surroundings – up to 150 m (500 ft) and the transmission time per battery charge is approximately 20 hours.
- For classic tour guide moderation
- Small, powerful transmitter with LCD display
- Connections for headset clip and plug-in microphone
- Simple 3-button operation
- Operation with any number of receivers »xepton« RX-1
- Range: up to 150 m
Please note: Xepton has been specially designed to be used in loud environments. For this reason, the range of the microphone is reduced in order to leave out distant noise. This property makes it necessary for the microphone to be close to the mouth of the speaker. This can be achieved bey using a headset, an ear microphone or a clip-on collar microphone.
Specifications
Dimensions: | 85 x 50 x 15 mm (H x W x D) |
Weight: | 66 g |
Frequency type: | ISM 2403 - 2480 MHz |
Transmission mode: | ISM 2.4 GHz FSK modulation with frequency hopping |
Transmission power: | Maximum 10 mW |
Latency: | < 30 ms |
Channel spacing: | 1 MHz |
Data rate: | 2 Mbps |
Power: | LI-ION 3,7 V / 1100 mAh |
Talk time: | 20 hours typical |
Range: | up to 150 m |
Scope of delivery:
- xepton TX-1
- ear-worn microphone EM-01
- belt clip BC-1
- USB-charging cable
- neck strap
- user manual
- warranty card
Downloads
Transmitter »xepton-2.4« TX-1 | A-5211-0 |