Stationary repeater »xepton« RP-1
The stationary repeater RP-1, a signal amplifier, extends the range of the audio transmission system »xepton« in connection with the stationary transmitter, transmitter T1 by approx. 400 meters each. Each transmitter T1 can be cascaded with a maximum of 10 repeater units and thus open up a range of up to 1000 meters.
A rack mount kit and remote antennas are available for rack mounting.
Specifications
| Device type: | Repeater |
| Dimensions (H x W x D): | 37 x 230 x 124 mm |
| Weight: | 390 g |
| Radio frequency type: | ISM 2403 - 2480 MHz |
| Transmission mode: | ISM 2.4 GHz FSK modulation with frequency hopping |
| Transmission power: | Maximum 10 mW |
| Voice codec: | 16bit / 8 KHz |
| RX sensitivity: | -95 dBm |
| Delay: | < 35 ms |
| Data rate: | 2 Mbps |
| Frequency width: | 2 MHz |
| Power supply: | USB 5V/DC / 1A |
| Power consumption: | 400 mA |
| Range: | up to 150 m |
| Frequency response: | 50 Hz - 7 kHz |
Standard scope of delivery:
- xepton RP-1
- Storage soft case
- USB power supply and cable
Downloads
| Stationary repeater »xepton« RP-1 | A-5231-0 |