
Loop amplifier Pro Loop NX3
The Pro Loop NX3 loop amplifier, like all amplifiers in the NX series, is designed primarily for continuous use. The integrated switched-mode power supply and the Class-D amplifier design enable high efficiency with low waste heat and forms the basis for high reliability and operational safety.
- Automatic Gain Control (AGC) ensures a consistent level on the listening loop.
- Metal Loss Correction (MLC) can be used to correct the frequency response due to metal structures.
Specifications
Power supply: | 100 - 240 V AC 50/60 Hz |
Amplifier output | |
---|---|
Loop current max.: | 2.5 A RMS |
Loop voltage max.: | 12 V |
Frequency range: | 80 - 6000 Hz (± 1.5 dB) |
Loop resistance DC: | 0.2 - 1.0 Ω |
Outputs | |
Loop output: | 2 pole Euroblock plug |
Inputs | |
Input 1: |
5-20 mV / 2 kΩ / 48 V fixed (MIC) 180 mV - 2 V / 10 kΩ (LINE) Switchable between Mic and Line Level, 3-pin Euroblock plug |
Input 2: |
5-20 mV / 2 kΩ / 48 V switchable (MIC), 3.5 mm stereo jack 180 mV - 2 V / 10 kΩ (LINE), 3 pol. Euroblock Stecker |
Input 3: | (LINE) 3.5 mm stereo jack, mono summed |
Automatic Gain Control (AGC) voice-optimised | |
Dynamic: | >40 dB |
Metal Loss Correction (MLC) | |
MLC: | 0 - 4 dB/Octave |
Cooling | |
Type: | fanless |
Mechanical specifications | |
Dimensions (H x W x D): | 32 x 167 x 95 mm |
Weight: | 370 g |
Downloads
Pro Loop NX3 | A-4230-0 |
Pro Loop NX3 is also available as a set in the following versions | |
Pro Loop NX3 CL set with table microphone and cross-the-counter loop | A-4231-0 |
Pro Loop NX3 SL set with table microphone and SignLoop | A-4232-0 |